BMW F series coding cheat sheet with ENET + ESYS or BimmerCode

Coding CHEAT SHEET
Full FA order list (VO code)

CODING CHEAT SHEET for F and G series 

F10, F11, F12, F01, F02, F06, F20, F22, F30, F31, F34, F54, F55, F56

TRY IT AT YOUR OWN RISK! WE TAKE NO RESPONSIBILITY!

We recommend using ENET CABLE and Vgate iCar Pro Bluetooth module with BIMMER CODE app

DescriptionModuleSectionFunctionDefault valueEnter new value
Disable seat belt status display – passengerACSM3000 AusstattungsflagsGurtzustandsanzeige_Beifahrer_GWF_GZA_BFaktiv / Werte=01nicht_aktiv / Werte=00
Disable seat belt status display – driverACSM3000 AusstattungsflagsGurtzustandsanzeige_Fahrer_GWF_GZA_FAaktiv / Werte=01nicht_aktiv / Werte=00
Disable seat belt reminder – passengerACSM3000 AusstattungsflagsSBR_BF_GWF_SBR_BFaktiv / Werte=01nicht_aktiv / Werte=00
Disable seat belt reminder – driverACSM3000 AusstattungsflagsSBR_FA_GWF_SBR_FAaktiv / Werte=01nicht_aktiv / Werte=00
Disable sound on disconnect SB – passengerACSM3000 AusstattungsflagsSPW_BFaktiv / Werte=01nicht_aktiv / Werte=00
Disable sound on disconnect SB – driverACSM3000 AusstattungsflagsSPW_FAaktiv / Werte=01nicht_aktiv / Werte=00
Turn Auto Start/Stop OFF by defaultCAS3000 TCTC_MSA_DEFAULT_OFFnicht_aktiv / Werte=00aktiv / Werte=01
Sets car’s Auto Start/Stop function to start in the last used setting (e.g. Off) when the engine is startedCAS3000 TCTC_MSA_MEMORYnicht_aktiv / Werte=00aktiv / Werte=01
Unlocks doors when engine is stopped (start/stop button is pushed). Allows single pull to open doors.CAS3002 CLMER_KEYOUT_AUTOVRnicht_aktiv / Werte=00aktiv / Werte=01
Comment = Remote Key opens with a 4th button tailgate or rear window (active)CAS3002 CLMOPEN_RSCR_WITH_REMOTE_KEY_SPFNnicht_aktiv / Werte=00aktiv / Werte=01
Comment = Remote Key opens with 3rd button tailgate or rear window (active)CAS3002 CLMREAR_SCREEN_IS_PRIMARYnicht_aktiv / Werte=00aktiv / Werte=01
Comment = Remote Key with 4th button (Special Function) activation – Enables Follow-Me-Home Lighting (Pathway Lighting) with short=press of Fob
Button 4 (Panic Button).		CAS3002 CLMREMOTE_KEY_SPECIAL_FCTnicht_aktiv / Werte=00aktiv / Werte=01
Closes mirrors + windows + moon roof through Key Fob – Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktivCAS3003 FH MASTERKOMFORTSCHLIESSUNG_FBnicht_aktiv / Werte=00aktiv / Werte=01
Closes mirrors + windows + moon roof through Comfort Access – Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktivCAS3003 FH MASTERKOMFORTSCHLIESSUNG_PAnicht_aktiv / Werte=00aktiv / Werte=01
Comfort opening: Delay between front and rear windows – NOT TESTEDCAS3003 FH_MasterKMFRT_OEFF_HINTENwert_01 / Werte=05
Comfort opening: Delay between the rear windows and SHD (Moon Roof) – NOT TESTEDCAS3003 FH_MasterKMFRT_OEFF_SHDwert_01 / Werte=23
Connect Comfort: Delay between front and rear windows- NOT TESTED – Presumed Delay on CloseCAS3003 FH_MasterKMFRT_SCHL_VORNEwert_01 / Werte=05
Connect Comfort: Delay between the front windows and SHD (Moon Roof) – NOT TESTED – Presumed Delay on CloseCAS3003 FH_MasterKOMFORT_SCHL_SHDwert_01 / Werte=23
Comment = can be the key 4 the FBD (OP_KEY_BUT_SPFN) used for the opening of the HK. This feature is currently available for F11 and F07.CAS3010 HKL_BEDIENUNGUSE_FBD4nicht_aktiv / Werte=00aktiv / Werte=01
The telephone ringtone is transferred to the ComboxCMB_MEDIA3001 TELEPHONE_PARAMETERINBAND_RINGINGnicht_aktiv / Werte=00
Set the Ring Tone (if no Inband Ringing is set)
F10/		CMB_MEDIA3001 TELEPHONE_PARAMETERRINGTONEring_tone2 / Werte=01ring_tone1 / Werte=00 or
ring_tone2 / Werte=01 or
ring_tone3 / Werte=02
Increase CIC stored addresses/messages from 25 to 50CMB_MEDIA3006 TELEMATIKMY_INFO_SUPPORTED_POISnicht_aktiv / Werte=00
By itself does nothing, yet if it is not set to aktiv, neither KOMFORTSCHLIESSUNG_FB nor KOMFORTSCHLIESSUNG_PA will work,FRM3020ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSENnicht_aktiv / Werte=00aktiv / Werte=01
Opening doors (FRONT) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will
stop the operation. This feature disables it. May need to wait for iDrive to reset for activation		FRM3030FH_TUER_AUF_STOP_MAUTaktiv / Werte=01nicht_aktiv / Werte=00
0: DRL disabled; 1: DRL_H via beam, halogen U.S. (without lights); 2: DRL_L via low beam; 3: DRL_S via separate TFLeuchte; U.S. Xenon (rings +
bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate
TFLeuchte without taillight / tail lights, U.S.; 7: TFL_S_ohne_SL via separate TFLeuchte without tail light / rear light, ECE		FRM3050DRL_MODUSdrl_s / Werte=03nicht_aktiv / drl_h / drl_l /
drl_s / tfl_s / tfl_ece / tfl_s
/ drl_s_ohne_sl /
tfl_s_ohne_sl
Set High Beam Assistant Defaukt to Automatic onFRM3050FLA_AUTO_AKTIVnicht_aktiv / Werte=00aktiv / Werte=01
high beam flash: Light control on the vehicle page: 0: in-phase, 1: intermittent, left and right opposite phase – NOT TESTED –
Presumed to work in conjunction with FLB_NSW		FRM3050FLB_INTERMITTIERENDsynchron / Werte=00asynchron / Werte=01
high beam flashing: Control Fog Lights: 0: NSW inactive, 1: NSW blink as FL / TFL – No Noticeable Effect – NEEDS ADDITIONAL
TESTING		FRM3050FLB_NSWnicht_aktiv / Werte=00aktiv / Werte=01
Maximum actuating time of the 4th Button (Special Function key) of the
Radio remote control can be activated within the FMH.
0: no activation of FMH by FFB SPFN possible;
1: 300 ms; 2: 350ms, 3 400ms, 4: 450ms;
5: 500 ms; 6: 550ms; 7: 600 ms;		FRM3050FOMEHO_FFB_SPFN_TIMESLOTwert_01__400ms / Werte=03
FollowMeHome: Activation timeFRM3050FOMEHO_TIMEOUTwert_01 / Werte=28
Daytime Running Light (DRL) Brightness in %FRM3050HELLIGKEIT_DRLwert_01__100% / Werte=64wert_01__100% /
wert_02__50% /
wert_03__54% /
wert_04__80% /
wert_05__51%
High Beam Brightness in %FRM3050HELLIGKEIT_FL_BIXENONwert_01 / Werte=64
Change to nicht_aktiv to enbale Fog Lights with High Beams / FlashersFRM3050NSW_AUS_BEI_FLaktiv / Werte=01nicht_aktiv / Werte=00
Welcome Lights – Low Beam Lights – 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)FRM3050WL_FUNKTION_ALnicht_aktiv / Werte=00nicht_aktiv / soft_on /
hard_on / soft_on_LED
Welcome Lights – High Beam – 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)FRM3050WL_FUNKTION_FLnicht_aktiv / Werte=00nicht_aktiv / soft_on /
hard_on / soft_on_LED
Welcome Lights – License Plate Lights – 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)FRM3050WL_FUNKTION_KZLhard_on / Werte=02nicht_aktiv / soft_on /
hard_on / soft_on_LED
Welcome Lights – Fog Lights – 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)FRM3050WL_FUNKTION_NSWnicht_aktiv / Werte=00nicht_aktiv / soft_on /
hard_on / soft_on_LED
Welcome Lights – Position Lights (Angel Eyes and Front Side LED’s) – 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)FRM3050WL_FUNKTION_POLhard_on / Werte=02nicht_aktiv / soft_on /
hard_on / soft_on_LED
Welcome Lights – Tail Lights – 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)FRM3050WL_FUNKTION_SSLhard_on / Werte=02nicht_aktiv / soft_on /
hard_on / soft_on_LED
Welcome Light: Activation timeFRM3050WL_TIMEOUTwert_01 / Werte=14
Expected Left Fog as Turn signalFRM3090AUSG_11_NSW_L_IS_INDICATORnicht_aktiv / Werte=00aktiv / Werte=01
Expected Right Fog as Turn signalFRM3090AUSG_12_NSW_R_IS_INDICATORnicht_aktiv / Werte=00aktiv / Werte=01
Button on key fob will be enabled to CLOSE the trunk – Does not work immediately; Allow for some time before it begins to workHKFM3010SCH_FBDnicht_aktiv / Werte=00aktiv / Werte=01
Button on driver-side will be enabled to CLOSE the trunk – Does not work immediately; Allow for some time before it begins to workHKFM3010SCH_TOEHKInicht_aktiv / Werte=00aktiv / Werte=01
Use w/ AboveHKFM3010TASTER_FBDnicht_aktiv / Werte=00aktiv / Werte=01
Album-info on / offHU_CIC3000 HMICDMM_ES_ALBUM_INFOnicht_aktiv / Werte=00aktiv / Werte=01
This adds a new option “Comfort Acess” in Settings—>door locks–>Lock Button..Works same as “All Doors”HU_CIC3000 HMICOMFORT_OPENINGnicht_aktiv / Werte=00aktiv / Werte=01
Day Driving Light Light settings (daytime) – Enables Day Light Driving as an option in your iDrive Lighting Option . It allows you to then
tick/untick this option. Useful for countries where DRL is not mandatory.		HU_CIC3000 HMIDAYDRIVING_LIGHTstandard / Werte=02perm_off / Werte=00 or
standard / Werte=02 or
perm_on / Werte=01
Scheunert Bernd EI-42HU_CIC3000 HMIEFF_DYN_SAILINGnicht_aktiv / Werte=00aktiv / Werte=01
Enable Efficient Dynamics Sport CID (Added Sport Displays the Vehicle Info screen (Power & Torque Meters)). Added Sport Displays shortcut to the
Dynmiac Drive Control Sport Mode Screen. – For some, the Sport Displays screens work; however, they are fixed in kW and Nm units
even after enabling EFF_DYN_SPORT_UNIT, in which case see KOMBI / 3008 PIA_Einheiten / DREHMOMENT and LEISTUNG for
workaround to force units in hp and ft lb. For 550i cars the gauges appear, but do not function at all – presume the issue is with the
N63 engine not having the required data stream.		HU_CIC3000 HMIEFF_DYN_SPORT_CIDnicht_aktiv / Werte=00aktiv / Werte=01
Added “Power” and “Torque” to the Settings=>Language/Units screen for use with EFF_DYN_SPORT_CID; however, the Power choices between kW,
and hp and Torque choices between Nm, ft lb, and Kg/m, can not be set.		HU_CIC3000 HMIEFF_DYN_SPORT_UNITnicht_aktiv / Werte=00aktiv / Werte=01
Enable Efficient Dynamics System CID (Added EfficientDynamics INFO to the Vehicle Info=> Efficient Dynamics screen (e.g. Climate and Battery
animations)). Consumption History still lacks Histogram and ECO PRO Tips is greyed out. Note: On 2011 F10, without ECO PRO, it also added
“Configure ECO PRO” to the Settings=>Driving mode screen. Since there is no actual ECO PRO Functionality, as it is not part of the MY 2011 Dynamic
Driving Control, “Configure ECO PRO” in nonfunctional.		HU_CIC3000 HMIEFF_DYN_SYS_CIDnicht_aktiv / Werte=00aktiv / Werte=01
Adds “Brightness” Slider (-5/+5) on Settings=>Lights Screen. Slider is non-functionalHU_CIC3000 HMIHELLIGKEIT_AMBILIGHT
Displays B & O sound menu – Removes L7 Surround Checkbox and Adds Bang & Oulfsen Menu to Settings=>Tone Screen with Studio and Expanded
Settings		HU_CIC3000 HMIHIGH_END_AUDIO_MENUEkein_menue / Werte=00volle insz
Enables Adapative Cruise Control iBrake Distance in HUDHU_CIC3000 HMIHUD_DISTANCE_INFOnicht_aktiv / Werte=00aktiv / Werte=01
Enables Turn Signals in HUD – Use w/ KOMBI / 3000 Anzeige_Konfiguration /BLINKER_HUD_ENABLE – Must Enable “Turn indicator” Checkbox
in Settings=>Heads-Up Display to work.		HU_CIC3000 HMIHUD_TURNSIGNALnicht_aktiv / Werte=00aktiv / Werte=01
Replaces “Surround” on/off checkbox with “L7 Surround” Slider (-5/+5) on Settings=>Tone screen. – Slider still appears to function as off (full
left) and on (any setting other than full left).		HU_CIC3000 HMIL7_SURROUND_CONFIGnicht_aktiv / Werte=00aktiv / Werte=01
Changes “Surround” on/off Checkbox to “L7 Surround” checkbox and adds the Logic7 Logo to right of the L7 Surround Checkbox on Settings=>Tone
Screen.		HU_CIC3000 HMILOGIC7_SYMBOLnicht_aktiv / Werte=00aktiv / Werte=01
Enables “Digital tachometer” checkbox on Settings=>Info Display screen. Can not be checked – non functional. NEEDS ADDITIONAL TESTING
and with HU		HU_CIC3000 HMIM_DIGITAL_TACHOnicht_aktiv / Werte=00aktiv / Werte=01
M tachometer units – Adds “Digital tach.:” to the Settings=>Language/Units screen; however, the choices between kmh and mph can not be set.
NEEDS ADDITIONAL TESTING and with HUD		HU_CIC3000 HMIM_DIGITAL_TACHO_EINHnicht_aktiv / Werte=00aktiv / Werte=01
M key settings available – No Noticeable Effect – NEEDS ADDITIONAL TESTINGHU_CIC3000 HMIM_KEY_SETTINGSnicht_aktiv / Werte=00aktiv / Werte=01
Adds “M Drive 1” & “M Drive 2” on Settings screen; however, DSC, Engine, Chassis, and Steering settings can not be set – Nonfunctional. Also adds
“M dynamic driving syst.” checkbox on Settings=>Info Display screen. When checked it completely turns off the dashboard tachometer Efficient
Dynamics display.		HU_CIC3000 HMIMDRIVEnicht_aktiv / Werte=00aktiv / Werte=01
Adds menu for xDrive Torque DistributionHU_CIC3000 HMIMOMENTDISTRIBUTION_MENUnicht_aktiv / Werte=00aktiv / Werte=01
Memorized Point Export feature (via USB) is coded or not (Asia only)HU_CIC3000 HMINAVI_DEST_EXPORTnicht_aktiv / Werte=00aktiv / Werte=01
Memorized Point Import feature (via USB) is coded or not (Asia only)HU_CIC3000 HMINAVI_DEST_IMPORTnicht_aktiv / Werte=00aktiv / Werte=01
Go to “Route Information” on iDrive when you’re going somewhere and it will tell you at what point(s) along your journey you’ll likely need to fill up.
You can then select that notice and it will tell you about the stations in the area at that point on your trip.		HU_CIC3000 HMINAVI_FUELSTOP_PROPOSALnicht_aktiv / Werte=00aktiv / Werte=01
This descibes whether the arrow popups are available in the main map windowHU_CIC3000 HMINAVI_FULL_GUIDINGPOPUPnicht_aktiv / Werte=00aktiv / Werte=01
This describes whether the arrow view is available as a map view in the main map. – Adds “Arrow View” to Navigation=>Map=>Map
views		HU_CIC3000 HMINAVI_MAP_ARROWVIEWnicht_aktiv / Werte=00aktiv / Werte=01
TMyPOI Export feature (via USB) is coded or not (not for Asia)HU_CIC3000 HMINAVI_MYPOI_EXPORTnicht_aktiv / Werte=00aktiv / Werte=01
MyPOI Import feature (via USB) is coded or not (not for Asia) – Adds “Import (USB)” to Navigation=>Map=>Points of Interest=>Option
Button=>Map		HU_CIC3000 HMINAVI_MYPOI_IMPORTnicht_aktiv / Werte=00aktiv / Werte=01
Describes, whether and how long the RNC infotext shall be shown on mapHU_CIC3000 HMINAVI_RNC_MAINMAP_TEXTpermanent / Werte=FFpermanent / nicht_aktiv /
10_sekunden
Road preview is possible or notHU_CIC3000 HMINAVI_ROAD_PREVIEWnicht_aktiv / Werte=00aktiv / Werte=01
Route record features are coded or notHU_CIC3000 HMINAVI_ROUTE_RECORDnicht_aktiv / Werte=00aktiv / Werte=01
This descibes whether the arrow popups are available in the splitscreenHU_CIC3000 HMINAVI_SPLIT_GUIDINGPOPUPaktiv / Werte=01nicht_aktiv / Werte=00
Trip Export feature (via USB) is coded or notHU_CIC3000 HMINAVI_TRIP_EXPORTnicht_aktiv / Werte=00aktiv / Werte=01
Trip Import feature (via USB) is coded or notHU_CIC3000 HMINAVI_TRIP_IMPORTnicht_aktiv / Werte=00aktiv / Werte=01
Notepad availableHU_CIC3000 HMINOTEPADnicht_aktiv / Werte=00aktiv / Werte=01
enable RSE brightnessHU_CIC3000 HMIRSE_BRIGHTNESSnicht_aktiv / Werte=00aktiv / Werte=01
Disable DVD Speedlock – Part 2HU_CIC3000 HMISPEEDLOCK_X_KMH_MAX3_kmh = 3 or 8_kmh = 8value = FF
Disable DVD Speedlock – Part 1HU_CIC3000 HMISPEEDLOCK_X_KMH_MIN3_kmh = 3 or 8_kmh = 8value = FF
Video just in combination with handbrake. Use w/ above SPEEDLOCK_X_KMH_MIN and SPEEDLOCK_X_KMH_MAXHU_CIC3000 HMIVIDEO_NUR_MIT_HANDBREMSEaktiv / Werte=01nicht_aktiv / Werte=00
Should be used along with HUD_MHU_CIC3001 EXBOXHUD_ACTIVATIONnicht_aktiv / Werte=00aktiv / Werte=01
Adds “M View” check box in HUD Displayed Information screen.HU_CIC3001 EXBOXHUD_Mnicht_aktiv / Werte=00aktiv / Werte=01
Disables iDrive legal disclaimer during iDrive startup. Change the value: ld_mit_timeout –> kein_ldHU_CIC3001 EXBOXLEGAL_DISCLAIMER_TIMEld_mit_timeoutkein_ld
Disables camera legal disclaimer shown on PDC and SideviewHU_CIC3001 EXBOXMACRO_CAM_LEGALDISCLAIMERld_mit_timeoutkein_ld
Disables camera legal disclaimer shown on Night VisionHU_CIC3001 EXBOXMACRO_NIVICAM_LDISCLAIMERld_mit_timeoutkein_ld
Togggle PDC display from vertical and horizontalHU_CIC3001 EXBOXPDC_Directionvertikal / Werte=00horizontal / Werte=01
Adds Pressure and Temperature Readings to the TPMS Screen. Do you have TPMS (Reifen Druck Control, aka RDC ) or FTMS (Reifen Pannen Anzeige,
aka RPA)? If you don’t know, are you valve stems metal or rubber? If rubber, you have FTMS, which operates on tire rotaional speed and has no
actual sensors to measure pressure and temperature		HU_CIC3001 EXBOXRDC_SAFETYnicht_aktiv / Werte=00aktiv / Werte=01
Enables “Speed limit information” checkbox on Settings=>Info Display screen. Can be checked – Non-functional – Needs camera fitted to the
rear-view mirror. The same camera is used for the Lane Departure Warning System (LDWS) Speed Limit Info System (SLIS), and
the Automatic High Beams System (AHBS). LDWS & SLIS are the same SWW ECU		HU_CIC3001 EXBOXSPEEDLIMIT_INFOnicht_aktiv / Werte=00aktiv / Werte=01
Describes whether the video watchdog is active for nightvision cameraHU_CIC3001 EXBOXVIDEO_WATCHDOG_NIGHTVISIONnicht_aktiv / Werte=00aktiv / Werte=01
Describes whether the video watchdog is active for rearview cameraHU_CIC3001 EXBOXVIDEO_WATCHDOG_REARVIEWnicht_aktiv / Werte=00aktiv / Werte=01
Whether the video watchdog is active for side view camerasHU_CIC3001 EXBOXVIDEO_WATCHDOG_SIDEVIEWnicht_aktiv / Werte=00aktiv / Werte=01
Describes whether the video watchdog is active for topview camerasHU_CIC3001 EXBOXVIDEO_WATCHDOG_TOPVIEWnicht_aktiv / Werte=00aktiv / Werte=01
HU_CIC3003 TELEFON_TELEMATIK_ONLINEPIM_DRIVING_TEXT_LENGTHup_to_three_linesno_details /
up_to_three_lines /
one_page / whole_text
Always Remember Air RecirculatingIHKA3000 IHKA_CodierdatenMEMORY_UMLUFTnicht_aktivaktiv
A/C to remeber to stay off when you powered it off last time you turn off the car keyIHKA3000 IHKA_CodierdatenOFF_MEMORYnicht_aktiv / Werte=00aktiv / Werte=01
Opening doors (REAR) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will
stop the operation. This feature disables it. May need to wait for iDrive to reset for activation		JBBF3070FH_TUER_AUF_STOP_MAUTaktivnicht_aktiv
SAT S1 though S7KOMBI3000 Anzeige KonfigurationSPA_SPORT_ENABLEnicht_aktiv / Werte=00aktiv / Werte=01
Digital Speed in MPH is a new option in BCKOMBI3000 Anzeige KonfigurationBC_DIGITAL_Vnicht_aktiv / Werte=00aktiv / Werte=01
BC calculation with the speedometer curve – correction for analog / Head up display speed – disabling those corrections , you will be able to see the
real speed. Can not find BC_DIGITAL_V_KORREKTUR for correction of digital speed.		KOMBI3000 Anzeige KonfigurationBC_V_KORREKTURaktiv / Werte=01nicht_aktiv
Enables Turn Signals in HUD – Use w/ HU_CIC / 3000 HMI/ HUD_TURNSIGNALKOMBI3000 Anzeige KonfigurationBLINKER_HUD_ENABLEnicht_aktivaktiv
At the start of the HUD will appear, this screen for encoded time. In 1 s increments. 0s = no displayKOMBI3000 Anzeige KonfigurationHUD_START_UP_SCREEN_ANZ_ZEITnicht_aktiv / Werte=00aktiv / Werte=01
Enables the reverse gear gong for JapanKOMBI3000 Anzeige KonfigurationR_GANG_AKUSTIK_ENABLEnicht_aktivaktiv
Enables the gear shift indicator – Part of EfficientDynamics. Requires 6MT. Gear indicator displays in upper left corner of BC indicating proper gear for
maximum fuel efficency.		KOMBI3003 FZG_AusstattungSPA_ENABLEnicht_aktiv / Werte=00aktiv / Werte=01
Speed Limit Display – Presumed to work in conjunction with SPEEDLIMIT_INFOKOMBI3003 FZG_AusstattungSPEED_LIMITnicht_aktiv / Werte=00aktiv / Werte=01
Force Sport Displays units in ft lb. – 0 – default 1 – Nm 2 – lb-ft 3 – kgm 4-15 ReserveKOMBI3008 PIA_EinheitenDREHMOMENTNmNm / lb_ft / kgm
Force Sport Displays units in hp. – 0 – default 1 – kW 2 – PS 3-15 Reserve –KOMBI3008 PIA_EinheitenLEISTUNGkWkW/PS
Max distance in meters to disable top camera view – Change to Werte = FFPDC3009D_SCHWELLE_1Abschaltschwelle_ab_09-09 /
Werte = 32		Abschaltschwelle_ab_09-09
/ Werte = 0F or
Abschaltschwelle_bis_09-09
/ Werte = 14 or
Abschaltschwelle_0-
Kanal_vorn / Werte = 00
Max distance in meters to disable rear camera view – Change to Werte = FFPDC3009D_SCHWELLE_2Abschaltschwelle_ab_09-09 /
Werte = 0A		Abschaltschwelle_ab_09-09
/ Werte = 0A or
Abschaltschwelle_bis_09-09
/ Werte = 14 or
Abschaltschwelle_0-
Kanal_vorn / Werte = 00
Max speed to disable top camera view – Change to Werte = FFPDC3009V_SCHWELLE_1Abschaltschwelle_ab_09-09 /
Werte = 24		Abschaltschwelle_ab_09-09
/ Werte = 0F or
Abschaltschwelle_bis_09-09
/ Werte = 14 or
Abschaltschwelle_0-
Kanal_vorn / Werte = 00
Max speed to disable rear camera view – Change to Werte = FFPDC3009V_SCHWELLE_2Abschaltschwelle_ab_09-09 /
Werte = 0F		Abschaltschwelle_ab_09-09
/ Werte = 0F or
Abschaltschwelle_bis_09-09
/ Werte = 14 or
Abschaltschwelle_0-
Kanal_vorn / Werte = 00
Time after switching off the optional clamp (see SA_Klemmen_FKT) within which a reconnection leads to the reactivation of the same
options available seat heating, seat ventilation, massage and active seat in each of the last active stage (delivery condition is equivalent to 15
minutes)
0: (no wake) 0 minutes;
1: 15 minutes;
2: 24 hours;
3: infinity (always reactivate);		PDC3009SA_MEMORY_ZEITWert_15 / Werte=01Wert_Dauer / Werte=03 or
Wert_15 / Werte=01 or
Wert_00 / Werte=00
Maximum speed at which side view may be activated. If any zero speed may be used. – Side View cameras to stay on all the time
(except reversing) – Part 1
F10/F11 X TRSVC 3000 SV_Deactivate_Speed initwert / Werte=0F
Comment = speed above which		PDC3009SV_Activate_Speed_Limitinitwert / Werte=0F
Speed above which side view will be automatically deactivated.
If zero no deactivation. – Side View cameras to stay on all the time (except reversing) – Part 2		PDC3009SV_Deactivate_Speedinitwert / Werte=0F

SHOPPING CART

close